.x: .3[.01] 2 .xx: .13[.005] .xxx: .051[.0020] this product manufactured with lead-free processing pb -01: 1 position -02: 2 positions -04: 4 positions -06: 6 positions -08: 8 positions *-10: 10 positions (* = not tooled) assembly length second end orientation -nus: notch up straight (p1 to p1) -nds: notch down straight (p1 to p4) -0100 to -1000 (in millimeters) (see note 6) (see cable length formula for prep length) ij5c-xx-xxxx-x-x-xxx-x-xx options -s: single ended -d: double ended end options plating options -s: 30? gold cable type -1: ctb-2650f-01 (0100 mm -1000 mm) -2: cca-316 (0400 mm - 1000 mm) designed & dimensioned in millimeters do not scale from this print b "a" - 0.23 + 0.13 25.175 .991 (ref) (typ) 0.950 .037 (typ) (see note 7) cable length= (assem. length - 18.41 [.725] 1%) assembly length = cable length + 18.41 (.725) 1% 9.207 ref .362 (typ) 'a' 'b' hdrl-xx (see note 5) pin one indicator - on top (obscured from view) first end (-nds) second end (-nus) notch down notch up pin one indicator (on bottom side) c c c c [ ] +.005 -.009 8.546 - 0.025 +0.125 .336 - .001 +.005 "b" 0.25 [.010] (typ both ends) 'c' 'c' ij-c-xx-01-b ij-c-xx-01-t c notch up 'g' ij-c-xx-01-b ij-c-xx-01-t notch down (ref) cable length detail 'a' scale 8 : 1 detail 'b' scale 8 : 1 partial 'c'-'c' scale 1 : 1 pin one indicator detail 'g' c fig.1 ( ij5c-04-xxxx-l-d-nus-1 shown) (showing second end orientation -nus) c c end of center conductors sheet of unless otherwise specified, dimensions are in [millimeters]inches tolerances are: decimals angles material: cable assembly, ij5c connector by: ij5c-xx-xxxx-x-x-xxx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 4/16/08 4 1 sheet scale: 4:1 covers: thermoplastic, color: black shield: copper alloy contact: copper alloy dielectric: lcp, color: black f:\dwg\misc\mktg\ij5c-xx-xxxx-x-x-xxx-x-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. all assemblies to be 100% electrically tested for shorts and opens. 3. all assemblies to be 100% hi-pot tested at 600v. 4. package assemblies in anti-static or static dissipative bags 5. label and etest sticker to be flaged around single wire and to be centered on cable assy as shown. label to contain: part number, shop order & date code. 6. cable length greater than 1000mm [39.4"] is a valid part number, but is not supported by s.i. test data. 7. cable less than 5" [127.0mm] have a length tolerance of .050"[1.27mm]. 8. measure over thermo weld features. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"a" (ref) 25.175 .991 (ref) (typ) 0.950 .037 assem. length 1% (see note 7) cable length= (assem. length - 18.41 [.725] 1%) 9.207 ref .362 (typ) pin one indicator (obscured from view) first end (-nds) notch down notch down fig.2 ( ij5c-04-xxxx-l-d-nds-1 shown) (same as fig. 1, except as shown) (showing second end orientation -nds) hdrl-xx (see note 5) second end (-nds) c c pin one indicator c 8.546 - 0.025 + 0.125 .336 - .001 + .005 ij-c-xx-01-t ij-c-xx-01-b c notch down ij-c-xx-01-b ij-c-xx-01-t notch down "a" (ref) 25.175 .991 (ref) (typ) 0.950 .037 assem. length 1% (see note 7) cable length= (assem. length - 9.21 [.362] 1%) pin one indicator (obscured from view) first end (-nds) notch down fig.3 ( ij5c-04-xxxx-l-s-1 shown) (same as fig. 1, except as shown) hdrl-xx (see note 5) c c c sheet of cable assembly, ij5c connector by: ij5c-xx-xxxx-x-x-xxx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 4/16/08 4 2 sheet scale: 1:0.666667 revision b f:\dwg\misc\mktg\ij5c-xx-xxxx-x-x-xxx-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
2.540 (dielectric) .10 7.117 (outer jacket) .280 2.084 (center conductor) .082 cable length 1% coax cable in-process step 1 (measure and strip cable) c c 4.450 .175 itj-c-fer-00x-t (slid under connector shield legs) solder ferrule to connector shield legs ipc class 2 solder joint req'd (4 places) ( typ.) in-process step 4 (position & solder itj-c-fer-001to connector legs ) c 2.477 (ref) .098 itj-c-fer-00x-t (soldered to connector shield legs) cca-316 coax cable itj-05.0-l-1 solder ferrule to cable shield (braid) (perimeter seam and 4 slits) ipc class 2 solder joint req'd in-process step 5 (final solder itj-c-fer-001 to tinned braid ) 7.117 (ref) .280 (tinned braid) 0.559 max. .022 tin buildup 2.084 (ref) .082 (tinned conductor) cable length (ref) 2.083 max. .082 tin buildup coax cable in-process step 2 (pre-tin braid & conductor) c c c 0.000 0.254 .00 .01 0.000 0.254 .000 .010 itj-c-fer-00x-t (slid over top of braid) (for soldering) c-252-xx-x sub-ij5c-05.0-nxs-x solder center sleeve c-252-xx-x to cable center conductor and to itj connector center pin ipc class 2 solder joint req'd in-process step 3 (install & solder sub-ij5c ) c orienting sub-ij5c-05.0-nxs-x sheet of cable assembly, ij5c connector by: ij5c-xx-xxxx-x-x-xxx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 4/16/08 4 3 sheet scale: 1:1 revision b f:\dwg\misc\mktg\ij5c-xx-xxxx-x-x-xxx-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
0.795 (ref) .031 cable length (ref) 'd' ij-c-xx-01-b ltc-15-xx (2 plcs) in-process step 6 (fill bottom cover housing) contacts face up 'e' ij-c-xx-01-b ij-c-xx-01-t align guide posts (bottom cover) to hole in top cover in-process step 7 (assemble top cover housing) 8.546 - 0.025 + 0.125 .336 - .00 + .00 (see note 8) ij-c-xx-01-b ij-c-xx-01-t c in-process step 8 (thermo weld covers) 'f' (ref) cable length detail 'd' scale 4 : 1 end of center conductor detail 'f' scale 4 : 1 contacts face towards key in top cover c detail 'e' scale 4 : 1 contacts face up gap between cover to be .003 [0.08] max. sheet of cable assembly, ij5c connector by: ij5c-xx-xxxx-x-x-xxx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing knowlden 4/16/08 4 4 sheet scale: 1:1 revision b f:\dwg\misc\mktg\ij5c-xx-xxxx-x-x-xxx-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
